Organizer for knitting needles and hooks

Organizer for knitting needles and hooks is an incredibly convenient and practical thing that allows the needlewoman to always keep her work tools in order. Making it yourself is pretty easy. This will take 1 hour of free time, two types of fabric as the basis of the organizer, lace for decorating pockets and as strings, sewing machine, scissors, ruler, tailor’s chalk or dry thin soap for applying lines to fabric, iron, needles or pins . Skills in sewing for the manufacture of the organizer will be sufficiently minimal, and therefore it will cope with it even inexperienced or distantly related to sewing a needlewoman.
For the manufacture of the organizer is best to use cotton fabric. It is easy to clean, easy to wash. Its only drawback is a high degree of shrinkage. Therefore, before we open all the fabrics, it is necessary to properly iron through a damp cloth so that they immediately shrink.Otherwise, in the process of further tailoring, the product may be deformed and its appearance will be irrevocably damaged.
spokes and hooks organizer

The size of the organizer in the finished form is 32 * 50 cm. From the prepared fabrics one should cut out two parts of the base. The front part is 37 * 57 cm in size, the internal part is 34 * 57 cm.
spokes and hooks organizer

On the inner side of the organizer there are 3 rows of pockets, - the bottom - under the little things, the middle - under the spokes, the top - under the hooks. It is necessary to cut out the details of the pockets in the following sizes: the lower and upper - 43 * 15 cm, medium - 34 * 31 cm. Upper sections of the details of the pockets need to be pressed to the inside of the side 4 cm, and then bend the allowance inside and iron again. After this, it is necessary to fix this bend with a machine stitch, laying it on 1 mm from it. This handles the upper edge of the pocket.
spokes and hooks organizer

If you wish, you can decorate the finished pocket details by stitching a narrow lace or braid on their front side. After that, the middle and upper pockets should be placed on the inside of the organizer, jokes along the cuts with pins. Then they should be sewn to the details of the base around the perimeter, and also to lay machine lines, dividing the pockets into separate sections for knitting needles and hooks. The distance between the dividing lines must be at least 3 cm.Then even thick knitting needles and hooks can easily fit into such pockets. The middle pocket should be equalized by the bottom cut with the base part, and the top one should be located 9 cm from the top of the middle pocket. The bottom pocket for small things is sewn with the latest. It is divided into three parts by machine lines, coinciding with the rows of pockets under the spokes.
spokes and hooks organizer

Two stitches should be sewn on the left side of the inside of the organizer. They should be located as follows: the lower one - at a distance of 16 cm from the lower slice, and the upper one - at a distance of 21 cm from the upper slice.
spokes and hooks organizer

After the inside of the organizer is fully prepared, you can collect it in a single piece. For this purpose, the front side of the organizer should be put on the inside (face to face), chopped and stitched along the side cuts with a 1 cm stitch. Then the organizer should be turned on the face, straighten the corners, press the sides. The resulting kinks will help to process the upper and lower sections of the product.
spokes and hooks organizer

The organizer should be turned on the seamy side, focusing on the bends of the sides, process the upper and lower seams, making a 1 cm line from the cuts.In the lower seam you need to leave a hole through which the product will turn out to the front side. The turned-out organizer should be ironed again. The hole for eversion should be sewn with secret stitches. On all perimeter of the organizer it is necessary to lay a finishing line at a distance of 5-7 mm from the edges. The top edge of the organizer must be pressed 5 cm toward the inside. The resulting valve will help the hooks do not get enough sleep during the operation of the product.
spokes and hooks organizer

The finished organizer folds three times along the length and is fixed by strings.

Related news

Organizer for knitting needles and hooks image, picture
Organizer for knitting needles and hooks 5


Organizer for knitting needles and hooks 67


Organizer for knitting needles and hooks 66


Organizer for knitting needles and hooks 97