How to make homemade skis for hunting ??

How to make homemade skis for hunting ??

  1. Just go to the store and buy. Are not very expensive.
    If you do not know how to do it and neither the Rara saw it, there is no experienced expert on this matter - you will not do anything worthwhile.
    Look here: "market.yandex.ru".
  2. on YouTube there is a film. Stretchy people there hunter makes himself skis look can come in handy.
  3. Hunting is better in the summer.
  4. Take a conventional sheet of plywood, if the hunter then skis need to be easy, find a scheme skis, it is possible to print out and as a pattern to circle on a plywood, and then a jigsaw to saw out, there are ready already in sizes 1: 1, to find easily
  5. Any hunter or lover of winter tourism knows how hard it is to walk on snowy virgin soil even on wide hunting skis. If we take into account the mass of equipment (rucksack, rifle, supplies), it turns out that the reference area of ​​skis for loose snow should be 2,5 3 times more than the usual ones.

    And such winter skis - cross-country vehicles, which would have been subject to any snowdrifts, it is not difficult to make the most from old ordinary skis. It will only require plywood (better waterproof) with a thickness of 3 5 mm, glue (Moment or epoxy), screws and paint (preferably with aluminum powder). First of all, based on the weight of the hunter with the equipment and the required specific pressure (10 g / cm2), you need to estimate the necessary ski area.

    In this case, the length can not be changed, only the width will be increased. I note, however, that the latter should not be more than 25 cm, otherwise it will be inconvenient to walk. From the plywood you need to cut the stripes of the selected width; front bend in the shape of the sock, for which it is desirable to steam them in boiling water. Then, all the workpieces (starting from the rear ones) are glued to the old skis (of course, the ointment from them must be removed beforehand) and additionally fixed with screws.

    Formed as a result of the lining of the front strip on the back of the editor prevents slipping back, and from the side slip protects the glued on the bottom of the bar length of 400 mm. In addition, from the top are placed delimiters, which do not let skiing against each other. After the glue dries, the snowmobiles are painted twice.

    Paint with aluminum powder is preferable: it has a lower coefficient of friction. I have used such skis for many years and are very pleased with them. Their weight is about 3 kg, and the maximum depth of immersion in loose snow even with the total weight of the hunter with full equipment is almost 115 kg does not exceed 5 see. Ski-ATVs: 1 old ski, 2 pad (plywood, S6 ... 8), 3 limiter, 4 back sheet (plywood, S3 ... 5), 5 slat, 6 front sheet (plywood, S3 ... 5).
    Yandex. Direct

  6. A purchase of religion does not allow you to use? Do not run wild money.
  7. Take 2 2 tiny pieces of elastic band and sticks two thin wax and cros
  8. yes no way ..
    The skis are made of glued wood to preserve the shape.
    Did and more than once for yourself skis from lindens .., the form after steaming is not kept long.
  9. Too serious occupation. Wood is harvested in advance. Not every log will fit. More shortly, a hemorrhoid and only.
    In the film "Happy People, Yenisei", this is described in detail. And the film itself is excellent.

Related news

How to make homemade skis for hunting How to make homemade skis for hunting How to make homemade skis for hunting How to make homemade skis for hunting How to make homemade skis for hunting How to make homemade skis for hunting How to make homemade skis for hunting How to make homemade skis for hunting How to make homemade skis for hunting How to make homemade skis for hunting